Remote desktop not working after windows 10 2020 update

[ad_1]

Remote Desktop is one of the best functions of Windows 10 which enables remotely located computer devices to connect. With the help of an internet connection, users can share their desktop screen with any other computer device located remotely. It is very useful for the business organizations who have their teams located in different locations as they can easily integrate their work without any physical boundaries.

However, sometimes this Remote Desktop Feature won’t work for you because of multiple different reasons such as –

  1. Remote Desktop not connected to the computer
  2. Windows 10 RDP client not working
  3. Remote Desktop won’t be working after update
  4. The feature won’t connect over the internet and many more

But, lucky for you Windows 10 Remote Desktop not working can be easily fixed on your computer. You just need to be a little attentive and have to use the following solutions to fix the remote connectivity problem.

Before get started check and make sure the remote desktop option enabled on both source and the destination computer.

Pro Tip : if your computer is not properly connected to the internet, you won’t be able to use this feature.

How to enable Remote Desktop on Windows 10

  1. Open Control Panel.
  2. Click on System and Security.
  3. Under the “System” section, click the Allow remote access link.
  4. Under the “Remote Desktop” section, select the Allow remote connections to this computer option.
  5. Also, check the ‘Allow Remote Assistant …’ checkbox under Remote Assistance.
  6. Click the Apply button the OK.

Enable remote desktop on Windows 10

Remote desktop not working windows 10

Well, Remote desktop feature enabled on both ends but still you are unable to connect to remote computer? Or getting an error like

Remote Desktop Disconnected.

This computer can’t connect to the remote computer.
Try connecting again. If the problem continues, contact the owner of the remote computer or your network administrator.

Don’t worry here we have different solutions help to fix Windows 10 Remote desktop connection problems.

Go through your internet connection

It is common knowledge that the Remote Desktop Feature entirely depends upon Internet connectivity. So, foremost, you need to check your internet connection and make sure that everything is working properly between your device and the local internet connection. You can check the network status from your computer if the connection isn’t right, then you can check your internet router and other cables. If you don’t find any problem in your connection, then you can contact your internet service providers as sometimes the server of a data providing company is down.

Pro tip: Press Windows + R, type google.com -t and click ok if you are getting replay like the image shown below then there is no more problem with an internet connection. But if you are not getting replay then you must check and fix your internet connection problem first.

Ping command

Allow remote desktop from firewall settings

 Sometimes your Windows firewall settings won’t let you establish a Remote Desktop connection freely. If the Remote Desktop is blocked by your firewall settings, then you won’t be able to establish a remote connection even if your internet connection is up to date. To check the status of your firewall settings for Remote Desktop, you have to follow these steps –

  1. Navigate to Search and type firewall in the box and let Windows Defender Firewall open.
  2. Now, open Allow an app or feature through Windows Firewall.
  3. And, click to change the settings.
  4. Next, you have to find Remote Desktop and check it and press Ok to save the changes instantly.

Allow remote desktop from firewall settings

Here, you can try to connect Remote Desktop and it should be working now. You need to keep one thing in your mind that Remote Desktop is not enabled by the firewall by default so if you are using this feature for the first time, then you have to enable it on your own.

Apart from the Windows firewall settings, you need to also make sure that your antivirus isn’t blocking the Remote Desktop feature. Some antivirus programs interfere with the system settings and to protect your computer, it is a good feature but became trouble if they block the Remote Desktop feature.

If this is your case, then you might have to uninstall the interfering antivirus program to use the Remote Desktop feature. However, you can install the antivirus program which won’t block Remote Desktop to save yourself from all the trouble.

Check RDP service running

If due to some reason remote desktop service not started or stopped you may encounter problems with remote connection. Check and make sure the service is running state by following steps below.

  • Press Windows + R, type services.msc and click ok,
  • scroll down and locate remote desktop service,
  • Right-click remote desktop service and select properties
  • Here check its startup set to automatic and its running state otherwise change it.
  • Also the same for remote produce call (RPC) service.

Start remote desktop service

Remove your credentials from Remote Desktop

 Some users have reported that Remote Desktop won’t connect problem occur with their credentials. So, you can try to remove your credentials from the Remote Desktop feature to test this theory. For this –

  1. You have to press the Windows key with S key and type remote settings in the search bar and near click on the Remote Desktop Connection.
  2. When Remote Desktop Connection window opens, go to the Advanced tab and click on Settings.
  3. Now, just press on Delete Credentials and this will definitely fix the problem for you.

Disable IPv6 protocol

A number of users report disable IPv6 (internet protocol version) help them to fix out this remote desktop issue. By default, Windows prefers IPv6 over IPv4. So if you are having problems using IPv6 to connect to the servers, you can force your computer to use IPv4 only.

  • Press Windows + R, type ncpa.cpl and click ok
  • Right click on the active network adapter and select properties.
  • Look for the checkbox which says Internet Protocol Version 6 (TCP/IPv6), uncheck it.
  • Click on OK, and restart your computer.
  • Now try to connect to the remote computer.

disable IPv6

Use third-party tools

If you are not able to fix the Remote Desktop feature even after changing your device settings, then you can take help from the third-party tools. There are plenty of different great third-party tools available that can help you in connecting remotely with another device. Moreover, these tools have a better interface and numerous other features to assist you.

So, you can now freely try to establish remote connections with other computer devices and make your work more efficient with better connectivity. The Windows 10 Remote Desktop, not working problem will not trouble you anymore, just follow the instructions.

Also read:

[ad_2]